The Before
This kitchen is in a Farmington Hills condo built in 1996. The cabinets were original oak, and the homeowner didn't like them. In her words, they were "ugly and horribly outdated." Oak cabinets were a common choice in kitchens built in the 1990s, and many of them are still in place today. They often hold up well physically, but their wood tone and door styles tend to date a kitchen quickly.
It wasn't just one thing about them. She disliked both the style of the doors and the color of the wood. Together, they made the whole kitchen feel stuck in the past, no matter what else changed around them.
The cabinets themselves still worked. The boxes were functional and gave the kitchen a solid foundation. The problem was how they looked.
The Problem
The homeowner wanted a fresh, updated kitchen, but she wasn't interested in the expense of tearing out and replacing all of her existing cabinets. A full replacement means demolition, new cabinet boxes, and a bigger disruption to the home, all to replace boxes that were still doing their job.
She wanted a more affordable way to change the look of her kitchen without the cost and hassle of starting over.
Painting Alone Wouldn't Fix Everything
Painting is often the first option for outdated cabinets, and it can make a big difference. Painting changes the color, but it keeps the shape of the original doors. For a homeowner who only dislikes the color, that can be enough. For a homeowner who also dislikes the door style, it leaves half of the problem in place.
That was the key question for this kitchen. The homeowner disliked both the color and the style of her oak doors, so whatever the solution was, it needed to change both.
The Solution
Armor Tough Coatings presented the homeowner with two options: professionally painting the existing cabinets, or refacing them with brand-new doors and drawer fronts.
Since she disliked both the color and the style of her original doors, refacing was the right fit. New doors and drawer fronts would replace the parts of the cabinets she didn't like, while the functional cabinet boxes stayed in place. She selected a classic Shaker-style door to give her kitchen the updated look she wanted.
Shaker doors are built from a flat center panel framed by four square-edged pieces. That simple, clean profile is a big part of why the style has stayed popular for so long. It looks updated without being tied to a passing trend, and it works in both traditional and modern kitchens.
Measuring and Ordering the New Doors
The crew removed the existing doors and drawer fronts and carefully measured each piece. Accurate measurements matter in refacing, because every new door and drawer front has to fit its opening exactly and line up with the pieces around it. With the measurements complete, the new doors and drawer fronts were ordered in the homeowner's chosen Shaker style. Because the new pieces are sized to the existing openings, the cabinet boxes themselves don't need to be rebuilt or modified.
Shop Preparation and Priming
The new doors and drawer fronts arrived unfinished at the Armor Tough Coatings shop. Each piece was sanded, prepared, and drilled for hinges.
Next, each piece received two coats of Centurion 2K primer. A two-component (2K) primer is mixed with a hardener before it's applied, rather than drying from a single can like a standard primer. Two coats built a smooth, uniform base for the topcoat to bond to. CIC Coatings, the maker of Centurion, describes its 2K primer as high build and easy to sand, with excellent chemical and moisture resistance. Sanding easily matters on cabinet doors, where any roughness in the primer would show through a smooth topcoat.
Spraying the Polyurethane Topcoat in Snowbound
After priming, the doors and drawer fronts were sprayed with Novalk Polyurethane Topcoat, with an added hardener, tinted to Sherwin-Williams SW 7004 Snowbound.
Finishing the doors in the shop made it possible to spray every piece under controlled conditions, so the finish came out smooth and even, with a factory-finished appearance. Adding the hardener turns the topcoat into a two-component system, built for the daily handling that kitchen cabinet doors get.
Snowbound is a soft white from Sherwin-Williams. Sherwin-Williams describes it as a "beloved white" that brings "contemporary cleanliness and playful familiarity" to a space. On Shaker doors, it gives the kitchen a clean, light look that's a clear break from the original oak. Snowbound has a light reflectance value (LRV) of about 83, according to Sherwin-Williams, which means it reflects most of the light that hits it. In a kitchen, that helps the cabinets brighten the room instead of absorbing light the way darker oak does.
Painting the Cabinet Boxes On-Site
While the doors were in the shop, the existing cabinet boxes stayed in the kitchen. On-site, the crew painted the boxes to match the new doors and drawer fronts, so the frames and the new fronts read as one finished piece.
Installing Doors, Hinges, and Hardware
With the boxes painted, the crew installed the new doors and drawer fronts with new soft-close hinges. Soft-close hinges let doors close quietly and gently instead of slamming, which is an upgrade the original cabinets didn't have. Gentler closing also means less impact on the doors over time, which helps protect the new finish around the edges.
To complete the look, the crew drilled for and installed the homeowner's selected black hardware. Black pulls and knobs stand out clearly against a white finish like Snowbound. That contrast gives the Shaker doors definition and keeps a light kitchen from looking flat.
About 10 Business Days From Start to Finish
The entire project took about 10 business days. Only four of those days were spent on-site in the home. The rest of the time went to preparing, priming, and finishing the new doors and drawer fronts in the shop. Keeping that work out of the home meant less disruption for the homeowner and more controlled conditions for the finish. In a condo, where living space is often more compact, keeping most of the work in the shop also meant the kitchen was out of commission for fewer days.
Before & After
The After
The original oak cabinets and dated door style have been replaced with clean, timeless Shaker-style doors in Snowbound. The light finish, paired with the homeowner's black hardware, gives the kitchen a crisp, updated look that feels completely different from where it started.
By choosing to reface rather than replace, the homeowner got the new kitchen look she wanted while keeping her existing cabinet boxes. The new doors and drawer fronts changed the style. The Snowbound finish changed the color. And the soft-close hinges added updated function every time a door closes. Because the boxes were painted to match the new fronts, the finished cabinets read as one complete set, with no visible line between what's new and what was kept.
Considering Cabinet Refacing in Farmington Hills?
If your cabinet boxes are in good shape but you don't like the style or color of your doors, refacing may give you the change you want without a full replacement. Armor Tough Coatings has served Metro Detroit since 2014, and every service comes with a 5-year warranty and a satisfaction guarantee.
Call (248) 716-0089 or request your free estimate online to get started.
What Our Client Said
★★★★★
This was the best company I have used for a remodeling project. They explained what would happen clearly. Kept me updated on timing. Cleaned up during & after the work was done... Their process produced very professional looking cupboards. I would use them again & refer them to others.


